PDA

View Full Version : mixing with existing colognes


dwaynek
01-03-2002, 05:37 PM
hi, i noticed that most commercial colognes have very tightly screwed atomizers. has anyone had success opening one of these dang things so that we can mix it with pheromone products?

**DONOTDELETE**
01-03-2002, 09:23 PM
The ones i\'ve seen looked like they were screwed on but it is just a cover to what is underneath, most of them are sealed and pressed on, i broke 2 bottles trying to get them off, the glass snaped off where the cap was pressed on, so if you try it make sure the bottle is empty, if not you could have a big problem.

**DONOTDELETE**
01-03-2002, 09:26 PM
BTW it would be probally easier to spray the cologne into another bottle and then do the mixing there and then put the final product in an atomizer that is pose to come apart, even if you get a cologne bottle apart, more than likely it won\'t seal as good as it would from the factory, then you would just be wasting the pheros.

**DONOTDELETE**
01-04-2002, 12:53 AM
I used a vise-grips and popped the sprayer off of my bottle. Now this worked, but the bottle of cologne was no more. I learned this the hard way and now my bathroom bag has one helluvan odor. Honestly, I have a bunch of the small sized sprayers, and I use them for everything. I put most of the cologne into a sealed bottle, and dip into it when I need it.